3 Common Problems Of Water Softeners And How You Can Fix Them

Occasional problems with your water softener could leave you less than enthused about it. Fortunately, many problems that you would experience with the softener can be easily repaired without the need to call for service. Here are some common problems and what you can do to fix them.

Development of Salt Bridge

Over time, your water softener might build up a salt bridge. The salt will form a crust that is visible at the top of the tank. When this happens, you could mistakenly believe that you still have a full tank of salt. In actuality, the bridge might be the only salt present in your tank.

To fix this issue, you can use a rubber mallet to break up the salt bridge. Gently tap the sides of the tank working from the bottom to the top. The bridge will eventually break and you can refill the tank with fresh salt. It may take up to three days before the water softener returns back to working normally.

Cycling at the Wrong Times

When your softener is cycling at the wrong times, the water might be passing through the softener when you are using it. This could result in hard water flowing through your faucets as opposed to the filtered water.

This is a common problem that occurs after a power outage. When the power returns, the softener is often on the wrong time which could lead to cycling.

To correct this problem, you need to reset the timer on the softener. Refer to your manufacturer's manual for instructions on how to reset the time.

Too Much Iron Content

If you have tested the water and the results show that you have too much iron in the water, it is important that you have it removed. Ingesting too much iron could pose a health risk and lead to symptoms such as nausea and dizziness.

To adjust the iron content in your water, you need to check your filter and replace it if necessary. If the problem persists, have your plumbing lines inspected. It is possible that you have a leak that is allowing unfiltered water to infiltrate your lines.

Water softener problems can impact the quality of your water. By paying close attention to the softener and testing your water on a regular basis, you can ensure the water in your home is of the best quality. Have your softener serviced by a professional from a company like Hague Quality Water of Kansas City Inc. if your problems persist.